Evolution of photosystem I - from symmetry through pseudo-symmetry to asymmetry

The evolution of photosystem (PS) I was probably initiated by the formation of a homodimeric reaction center similar to the one currently present in green bacteria. Gene duplication has generated a heterodimeric reaction center that subsequently evolved to the PSI present in cyanobacteria, algae and plant chloroplasts. During the evolution of PSI several attempts to maximize the efficiency of light harvesting took place in the various organisms. In the Chlorobiaceae, chlorosomes and FMO were added to the homodimeric reaction center. In cyanobacteria phycobilisomes and CP43' evolved to cope with the light limitations and stress conditions. The plant PSI utilizes a modular arrangement of membrane light-harvesting proteins (LHCI). We obtained structural information from the two ends of the evolutionary spectrum. Novel features in the structure of Chlorobium tepidum FMO are reported in this communication. Our structure of plant PSI reveals that the addition of subunit G provided the template for LHCI binding, and the addition of subunit H prevented the possibility of trimer formation and provided a binding site for LHCII and the onset of energy spillover from PSII to PSI.     

Limnology of Crater Lakes in Los Tuxtlas,Mexico

Investigations on the abundance, biomass and position of heterotrophic flagellates (HF) in the benthic microbial food web of a melt water stream on King George Island, Antarctic Peninsula, were undertaken during the Antarctic summer from 23rd December 1997 until 13th March 1998. Abundance and biomass of potential HF resources (picophotoautotrophic and non-photoautotrophic bacteria) as well as potential predators on HF (ciliates and meiofauna) were also investigated. HF abundance ranged from approximately 9 × 10³ to 81 × 10³ cells cm^–3, values which fall into the same range as those found in lower latitudes. Numerically important benthic HF were euglenids, kinetoplastids, thaumatomastigids and especially chrysomonads. Most species identified have been shown to have a worldwide distribution. Abundance of the benthic ciliates ranged from 27 to 950 cells cm^–3. Mean bacterial abundance was 1.9 × 10⁷ and 5.2 × 10⁸ cells cm^–3 for picophotoautotrophic and non-photoautotrophic benthos, respectively. The well-developed microbial community was able to support the large number of nematods, gastotrichs, tardigrads and rotifers with abundances reaching more than 1000 individuals cm^–3. The largest portion of heterotrophic biomass was formed by the meiofauna with a mean of 63 g C cm^–3, followed by that of the heterotrophic bacteria with 4.80 g C cm^–3. Picophotoautotrophic bacteria contributed a mean of 1.37 g C cm^–3. HF and ciliates mean biomass was 0.61 and 1.99 g C cm^–3, respectively, with the HF biomass comprising between <10 and 70% of the total protozoan biomass. The data obtained in this study identify the melt water stream as a hot-spot of heterotrophic microbial and meiofaunal activity during the austral summer. The HF in the melt water stream formed a diverse group in terms of taxa and potential feeding types. Chrysomonads, kinetoplastids, euglenids and thaumatomastigida were the most abundant taxa. A classification into feeding types identified an average of 34% of the total HF as bacterivorous while all others were able to utilise other, larger organisms as resources. Potential trophic interactions between HF and bacteria and higher trophic levels are discussed.     

Cell—cell interactions in bacterial populations

In developing bacterial populations many essential processes, such as division, genetic transformation, sporulation, and synthesis of antibiotics and secondary metabolites, are regulated by intercellular communication mediated by secretion of signaling molecules, such as homoserine lactones and peptides. Another intercellular communication type, namely a physical contact between cells (cell aggregation), plays a key role in formation of biofilms or cellular consortia and in cell proliferation under unfavorable conditions. The mechanisms involved in these two types of bacterial communication are discussed in this review.Translated from Biokhimiya, Vol. 69, No. 11, 2004, pp. 1555–1564.Original Russian Text Copyright © 2004 by Voloshin, Kaprelyants     

Magnetosome chain arrangement and stability in magnetotactic cocci

We have studied the disposition of chains of magnetosomes inside magnetotactic cocci with light and electron microscopy. Light microscopy of isolated cocci indicated that the chains of magnetosomes are disposed on opposite sides of the cell. Electron spectroscopic imaging of whole unprocessed bacteria, showed the magnetosome chains in the cells. Freeze-etching of the cell surface allowed the observation of the close association of the chain with the cell surface. During the replication process of the freeze-etching, the magnetosome chains remained attached to the replicas, which indicates that chains were very close to the cell surface before freezing. We provide evidence that the large area of the contact faces between magnetosomes in a chain may provide an extra mechanical stability that helps keep the magnetosomes in chains even after isolation from the bacteria. Comparison with pointed magnetosomes from different cocci present in the same samples showed that the maintenance of linear chains is more difficult to be achieved because of the geometry of the crystals.     

Antibacterial activity of ethanolic and aqueous extracts of Acacia aroma Gill. ex Hook et Arn

The purpose of the present study was to investigate the antibacterial activity of seven ethanolic extracts and three aqueous extracts from various parts (leaves, stems and flowers) of A. aroma against 163 strains of antibiotic multi-resistant bacteria. The disc diffusion assay was performed to evaluate antibacterial activity of the A. aroma crude extracts, against several Gram-positive bacteria (E. faecalis, S. aureus, coagulase-negative stahylococci, S. pyogenes, S. agalactiae, S. aureus ATCC 29213, E. faecalis ATCC 29212) and Gram-negative bacteria (E. coli., K. pneumoniae, P. mirabilis, E. cloacae, S. marcescens, M morganii, A. baumannii, P. aeruginosa, S. maltophilia, E. coli ATCC 35218, P. aeruginosa ATCC 27853, E. coli ATCC 25922). All ethanolic extracts showed activity against gram-positive bacteria. Among all obtained extracts, only leaf and flower fluid extracts showed activity against Gram-negative bacteria. Based on this bioassay, leaf fluid extracts tended to be the most potent, followed by flower fluid extracts. Minimal inhibitory concentration (MIC) values of extracts and antibiotics were comparatively determined by agar and broth dilution methods. Both extracts were active against S. aureus, coagulase-negative stahylococci, E. faecalis and E. faecium and all tested Gram-negative bacteria with MIC values from 0.067 to 0.308 mg/ml. In this study the minimal bactericidal concentration (MBC) values were identical or twice as high than the corresponding MIC for leaf extracts and four or eight times higher than MIC values for flower extracts. This may indicate a bactericidal effect. Stored extracts have similar antibacterial activity as recently obtained extracts. The A. aroma extracts of leaves and flowers may be useful as antibacterial agents against Gram- negative and Gram-positive antibiotic multi-resistant microorganisms.     

钛合金和钴铬合金表面白色念珠菌粘附的研究

目的比较钛合金(Ti-6Al-4V)和钴铬合金(Chromium-Cobaltalloy)表面白色念珠菌粘附能力的大小,研究表面粗糙度与细菌粘附的关系。方法将不同表面粗糙度的钛合金和钴铬合金试件进行白色念珠菌体外粘附试验,采用菌落形成计数法测定试件表面的细菌粘附量。结果各钛合金试件组的细菌粘附量均少于相同表面粗糙度的钴铬合金试件组,两种金属试件表面的细菌粘附量均随表面粗糙度的增大而增加。结论钛合金较钴铬合金更能减少由白色念珠菌引起的义齿性口炎等并发症,同时修复体表面严格的研磨抛光也能有效减少这些并发症。     

Modeling and observer design for recombinant Escherichia coli strain

A mathematical model for recombinant bacteria which includes foreign protein production is developed. The experimental system consists of an Escherichia Coli strain and plasmid pIT34 containing genes for bioluminescence and production of a protein, β-galactosidase. This recombinant strain is constructed to facilitate on-line estimation and control in a complex bioprocess. Several batch experiments are designed and performed to validate the developed model. The design of a model structure, the identification of the model parameters and the estimation problem are three parts of a joint design problem. A nonlinear observer is designed and an experimental evaluation is performed on a batch fermentation process to estimate the substrate consumption.     

Identification of a denitrifying bacterium and verification of its anaerobic ammonium oxidation ability

A strain D3 of denitrifying bacterium was isolated from an anammox reactor,and identi-fied as Pseudomonas mendocina based on the morphological and physiological assay,Vitek test,Biolog test,(G C) mol% content,and 16S rDNA phylogenetic analysis.As a typical denitrifying bac-terium,strain D3 achieved the maximal nitrate reduction rate of 26.2 mg/(L·d) at the nitrate concen-tration of 88.5 mg N/L.The optimal pH and growth temperature were 7.84 and 34.9℃,respectively.Strain D3 was able to oxidize ammonia under anaerobic condition.The maximum nitrate and ammo-nium utilization rates were 6.37 mg/(L·d) and 3.34 mg/(L·d) ,respectively,and the consumption ratio of ammonia to nitrate was 1:1.91.Electron microscopic observation revealed peculiar cell inclusions in strain D3.Because of its relation to anammox activity,strain D3 was presumed to be anammoxosome.The present investigation proved that denitrifying bacteria have the anammox ability,and the results have engorged the range of anammox populations.     

The production-influencing factors of extracellular polysacchadde(EPS) from a Strain of lactic acid bacteria and EPS extraction

The influencing factors of extracellular polysaccharide(EPS)produced from a strain of lactic acid bacteria(LAB L15)were studied by using the phenol-H2SO4 method.It was demonstrated that the strain produced EPS at the most amount when it was incubated for 40-48 h and when the pH value was 4 under 30℃.Glucose was the most suitable carbon source for LAB-producing EPS.The rough EPS was obtained from L15 culture after centrifugation,dialysis,deprotein,decoloration,and ethanol-precipitation.The sample was at least composed of two polysaccharides mat were completely different in molecular weight and the amount.The purified EPS was passed through the SephadexG-200 colunm and it showed that it was a sample purified by thin layer chromatography.     

磁泳分离细菌新方法的研究

从酸性矿坑水中富集培养分离到的嗜酸氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,A.ferrooxidans）[1-2] 菌同趋磁细菌具有一定的相似性。通过显微镜观察发现,部分浸矿细菌在外加磁场的作用下具有微弱的趋磁性,基于菌种的这种特性,设计了磁泳分离仪,对其在磁场作用下泳动（磁泳）进行分析,经磁泳后的近磁、远磁菌的生理特性有较大的差异。从用涂布平板法获得的近磁菌纯培养A. ferrooxidans菌体中,分离得到纳米磁性颗粒,能谱分析表明,其主要成分为Fe和O元素。实验结果证明,A. ferrooxidans具有微弱趋磁性,采用磁泳分离该类菌体内含有磁性颗粒的细菌是可行的,这一分离技术的进一步完善和改进将为传统的微生物菌种分离提供一种新型分离技术,也将大大促进趋磁细菌的研究,而且它与浸矿工艺的结合将大大促进我国生物冶金的研究步伐。